SculpSure Denver

SculpSure is the world’s first FDA-cleared laser treatment for non-invasive fat removal of the flanks, abdomen, and double chin area. It’s a state-of-the-art, controlled light-based technology, ideal for patients looking to achieve a slim, sculpted physique.

Stubborn fat is an aggravating and annoying problem that is difficult to combat with dieting and exercise alone. For countless patients, stubborn fat is the only thing standing between them and their ideal figure. Enter SculpSure in Denver, a non-invasive body contouring procedure customized to each patient’s unique goals by double-board-certified Facial Plastic Surgeon, Dr. Stephen Weber. With Dr. Weber’s strategic treatment plans, patients can enjoy effortless fat loss with minimal downtime and side effects.

What is SculpSure?

Diet and exercise are an important part of fat loss, but many times these efforts are not enough to reduce the appearance of stubborn fat in problem areas. In these cases, a different treatment approach is necessary if patients want real and long-lasting results.

SculpSure is a convenient body contouring option that can be performed over one’s lunch break in typically less than 30 minutes. Patients can get in and out of the office quickly and immediately return to work, school, or shopping after their SculpSure session.

SculpSure relies on the power of apoptosis, or laser-induced fat cell death. Laser heat gently warms the fat cells until they collapse. The body then discards them as waste via the lymphatic system. As time passes, the body will reveal lasting improvement in areas that were previously marred by pockets of stubborn fat. In clinical studies, SculpSure has been shown to help patients lose up to 25% of fat cells in the treatment zone.

Thankfully, these discarded fat cells will not regenerate. However, SculpSure treatment should always be combined with a commitment to a healthy lifestyle.

SculpSure at a glance

Procedure time: 25 minutes

Anesthesia: None required

Setting: Office

Recovery: Immediate

Woman with both hands to her cheeks highlighting Sculpsure in Denver

How does SculpSure work?

Pockets of fat are composed of many tiny fat cells. The number of cells stored in the body typically remains constant throughout adult life. Fat cells increase and decrease in size based on weight gain or loss. When diet and exercise shrink fat cells to an optimal size and fat is still visibly present, SculpSure in Denver may present a viable solution. By gently heating fat cells to a temperature of 42-47 degrees Celsius, SculpSure damages the structural integrity of fat cells and they are destroyed. For countless patients, SculpSure has been the non-invasive treatment option that solved their stubborn fat problem.

What are the benefits of SculpSure?

Safety

SculpSure is FDA-approved for non-invasive fat loss. The technology can be tailored to your individual comfort level. Nearly every patient can tolerate the lower power settings, but a higher energy delivery can create more dramatic results. There are virtually no side effects, no incisions, and no risk of infection or scarring.

Appropriate for all areas of the body

SculpSure can be used to firm and tone the arms, belly, flanks, and thighs – anyplace where stubborn fat is causing a problem. SculpSure is also approved for no-downtime treatment of the double chin or submental area. It works for all body shapes and sizes and for all skin tones.

Ease

The treatment time for SculpSure is short – less than 30 minutes. No follow-up is required, and up to four areas can be treated at the same time, making SculpSure among the most efficient treatments on the market.

Long-lasting results

Results with SculpSure are sustainable and last a long time. Once the fat cells are destroyed, they will not return. Patients can achieve up to 25% reduction of problem areas with SculpSure. The skin is also tightened through an increase in collagen production.

No downtime

With SculpSure, you can get back to your routine instantly. You can even exercise the same day as your treatment.

What are the details of the procedure?

The SculpSure treatment is performed in the office setting. No anesthesia or sedation is necessary. Patients remain awake and alert throughout the procedure. Before treatment begins, we help you become as relaxed and comfortable as possible. When the patient is ready, the following steps are performed to carry out the procedure:

Four customizable applicators are placed over areas where stubborn fat is present. The applicators can be arranged in numerous configurations to meet the specific and unique needs of any and all patients.
The temperature is monitored by the SculpSure device and technician. A continuous contact cooling system is used to ensure the skin is not harmed during the procedure.
SculpSure uses hyperthermic laser technology to deliver energy to stubborn fat. Fat cells are heated to a temperature of 42-47 degrees Celsius.
Total procedure time is usually between 20-25 minutes. This fast procedure time allows patients to receive treatment without having to take much time off work. Many patients choose to receive their treatment during their lunch break.

SculpSure Before & After

Take a look at some of the results from our previous patients

Individual results may vary

View All

What can I expect after my SculpSure session?

One of the greatest advantages of SculpSure is that there is no downtime. Patients can quickly and easily resume their normal activities and schedules. Side effects tend to be restricted to a feeling of soreness in the treatment zone that is on par with muscle exhaustion after an intense workout at the gym.

To support the healing process, you can gently massage the treatment areas and exercise the same day to help the body flush out the broken-down fatty tissue. Be sure to drink plenty of fluids when you get home and continue to hydrate properly in the coming weeks and months.

What are the details of the procedure?

The SculpSure treatment is performed in the office setting. No anesthesia or sedation is necessary. Patients remain awake and alert throughout the procedure. Before the procedure begins, the SculpSure facilitator helps the patient become as relaxed and comfortable as possible. When the patient is ready, the following steps are performed to carry out the procedure:

Four customizable applicators are placed over areas where stubborn fat is present. The applicators can be arranged in numerous configurations to meet the specific and unique needs of any and all patients.
The temperature is monitored by the SculpSure device and technician. A continuous contact cooling system is used to ensure the skin is not harmed during the procedure.
SculpSure uses hyperthermic laser technology to deliver energy to stubborn fat. Fat cells are heated to a temperature of 42-47 degrees Celsius.
Total procedure time is usually between 20-25 minutes. This fast procedure time allows patients to receive treatment without having to take much time off work. Many patients choose to receive their treatment during their lunch break.

What can I expect from my recovery?

Most patients feel a tingling sensation throughout their procedure. This sensation is well tolerated because the SculpSure device includes a cooling plate. Most patients describe a level of discomfort that is somewhere between 3 and 4 on a 10-point scale. The energy level is typically slowly increased based on the patient's comfort level. One of the great things about SculpSure is that this level of discomfort is reduced to 0 after the procedure is over. No recovery period or activity restrictions are necessary. Patients may leave the office and return to their normal routine after their SculpSure technician clears them.

Weber Facial Plastic Surgery

Schedule Consultation

720-738-4443

I was recommended by a few friends. Dr. Weber is fantastic! I love the youthful look of my skin now that I have had my treatments. He takes the time to understand my goals.

Review - SculpSure

Why should I select Dr. Weber for my SculpSure treatment?

Bringing the most cutting edge cosmetic solutions to his clients is among Dr. Weber’s top priorities. He frequently attends industry events, conferences and seminars to stay ahead of the curve when it comes to new, innovative technology.

Dr. Weber began his medical career at Boston University’s School of Medicine, afterwards pursing a demanding 5-year residency in Otolaryngology and Head and Neck Surgery at Oregon Health and Science University.

He then went on to complete a prestigious fellowship in Facial Plastic Surgery at the University of Michigan.

Dr. Weber is passionate about donating his services to those in need, and regularly participates in global humanitarian efforts. Most recently he traveled to Tanzania to help facilitate no-cost medical and surgical services to those suffering from facial deformities.

Reflecting your most cherished aesthetic goals while preserving individuality

Gallery

View All

How much does SculpSure cost?

Costs will vary according to the number of areas being treated and the amount of stubborn fat reduction required. Dr. Weber will make sure you leave your Denver consultation with a detailed, personalized quote. We will assist you with financing options so you can move forward with your cosmetic vision.

Aftercare FAQ

Will I be able to fly after SculpSure?

Yes. You can get on a plane right away. However, since you may experience some mild soreness in the treatment areas after SculpSure, a longer flight might be uncomfortable.

Can I drink alcohol after SculpSure?

Yes. You can have a cocktail the same day after receiving treatment with SculptSure.

Is SculpSure painful?

No, SculpSure is not painful. Mild soreness is common in the treatment areas after your session, but this is similar to post-workout muscle fatigue and should die down within a few hours or by the end of the day. The discomfort won’t be enough to prohibit you from resuming your normal activities right away.

What about sun exposure after SculptSure? Is it safe?

Yes. SculpSure’s laser energy penetrates the skin at least half an inch below the epidermis, so sunbathing after your session is permissible. However, to be on the safer side, Dr. Weber advises postponing this activity for 7 days before and after treatment.

Who makes the best candidate for SculpSure?

Adult patients who have not been able to get rid of stubborn fat through traditional means such as diet and exercise may be excellent candidates for SculpSure in Lone Tree. The procedure is generally limited to patients with no serious medical conditions.

A positive outlook and realistic expectations are a requirement for candidacy. SculpSure is a fat loss solution – NOT a weight loss treatment. Patients who are overweight or obese are encouraged to talk to Dr. Weber about getting their weight to a target level before undergoing the procedure.

Why choose Dr. Stephen Weber?

Dr. Weber is a renowned, double-board-certified Facial Plastic Surgeon whose precision, artistry, and empathetic bedside manner have earned him a reputation as a trusted authority in his field. He is committed to remaining ahead of the curve when it comes to introducing innovative new technology, and he is excited to offer patients the numerous life-changing benefits of SculpSure.

Dr. Weber completed exhaustive training in both Otolaryngology-Head and Neck Surgery and Facial Plastic Surgery and has authored over 50 peer-reviewed medical publications. He is currently an Adjunct Clinical Faculty member at Rocky Vista University, where he imparts his cutting-edge techniques and extensive knowledge to the next generation of physicians. Additionally, Dr. Weber is a trainer for Allergan (makers of BOTOX and Juvederm), Merz (makers of Xeomin, Radiesse, and Belotero), and Alma Lasers.

Weber Facial Plastic Surgery

Contact

720-738-4443

Schedule a Consultation

10463 Park Meadows Dr STE 110, Lone Tree, CO 80124